
LADWP · SoCalGas
Insulation rebates.
Clear answers. Real possibilities.
A more comfortable home could cost less than you think. Find out which utility programs may fit your insulation project before you begin.
Discuss my rebate optionsFor qualifying LADWP residential properties
LADWP attic insulation rebates
LADWP’s program covers qualifying new batt and roll attic insulation above conditioned living space. The published base rate is $0.50 per square foot for insulation above R-19, or $0.30 for qualifying limited-clearance attics at R-19 or below. Its current page also advertises an extended $0.25-per-square-foot launch bonus. Confirm the bonus before budgeting.
Who and what can qualify?
- An active LADWP residential electric account at the installation address; the account holder or verified owner applies.
- New batt or roll insulation only. Spray foam and loose-fill insulation are not covered by this program.
- Insulation above R-19; the lower tier applies where attic clearance is under 24 inches and the higher R-value cannot be achieved.
- An eligible existing dwelling with central, window or wall-mounted air conditioning. New construction and non-living spaces are excluded.
- Purchase and installation on or after September 1, 2025; apply after installation, within 12 months of the relevant purchase or installation date.
- One rebate per residence every 15 years. No duplicate utility rebates for the same qualifying product.
What could that look like?
Illustrative calculations for eligible insulation above R-19—not quotes or approvals. Installed qualifying area may differ from your home’s floor area.
| Eligible area | Base rebate | With bonus* |
|---|---|---|
| 600 sq ft | $300 | $450 |
| 1,000 sq ft | $500 | $750 |
| 1,500 sq ft | $750 | $1,125 |
| 2,000 sq ft | $1,000 | $1,500 |
*Only if the extended bonus is available and approved. Rebates cannot exceed 80% of eligible insulation, permit and installation costs. Removal, cleanup and other nonqualifying work are not automatically covered. Limited funding; no guaranteed payment.
Documents to prepare
Paid, itemized invoice and installation contract with your licensed contractor.
Manufacturer’s certificate showing the product’s insulation rating.
Dated color photos taken from the same angle before and after installation.
LADBS permit with a finaled status; ownership evidence if requested.
Submit through LADWP’s online account or use its official mail-in application, with all required documents. Keep copies. LADWP may inspect the work before payment.
LADWP requirements & applicationSpecial eligibility—not a general insulation rebate
SoCalGas insulation incentives
SoCalGas’s 2026 application lists exclusive attic and wall insulation rebates for customers impacted by the 2025 Southern California wildfires in specified eligible ZIP codes. These are not available to every SoCalGas customer. Check both your address and your wildfire-impact eligibility against the official application.
Attic insulation requirements
The home must have a natural gas furnace. Insulation must be added to existing insulation, and the added material must be at least R-11. The listed rebate is based on the additional qualifying insulation installed—not simply the final total R-value. A full removal-and-replacement project should not be assumed eligible.
Wall insulation requirements
The exclusive wall rebate is $1.65 per square foot for qualifying blown-in insulation in a pre-1988 home with no existing wall insulation and a natural gas furnace. The effective year built is determined by the local tax assessor. Installed insulation must achieve a value above R-0.
Wildfire-only attic rebate tiers
| Added R-value | Rebate per eligible sq ft |
|---|---|
| R-11 | $1.45 |
| R-19 | $1.70 |
| R-30 | $2.00 |
| R-38 | $2.30 |
| R-44 | $2.50 |
| R-60 | $3.00 |
Example only: 1,000 eligible sq ft of added R-11 insulation × $1.45 = $1,450 before utility review and any applicable limits. This does not establish that your home qualifies.
For this 2026 application, qualifying products must be purchased and installed January 1–December 31, 2026, with applications postmarked by December 31, 2026. Prepare the signed application, current gas bill and paid invoice, plus any required ownership evidence. New construction is excluded. Funds are first-come, first-served; these exclusive incentives cannot be stacked with other incentives through the program.
A better home starts with the right plan.
Check your utility and property
Bring your utility provider, project address and any recent insulation records to your evaluation.
Choose the right insulation
We discuss materials, attic condition and your project needs. Rebate eligibility is one consideration—not a reason to choose the wrong assembly.
Keep your paperwork together
Ask us about rebate assistance and project documentation before work begins. You remain responsible for the application, and the utility decides approval.
Let’s talk comfort—and your options.
Insulation can reduce heat transfer and help your home feel more consistent year-round. Actual energy savings vary by home and usage.
